Tiles won’t stick to bsa membrane - TilersForums.com

[Krystie]

Hi guys many thanks for all your response it didn’t say with the instructions to prime the membrane on top but we primed underneath what would we prime on top with going to lift all the tiles it’s got a wet room former underneath the membrane

 

[Krystie]

There is no u dear floor heating

 

[Krystie]

 

[Krystie]

This is the kit that we brought but tray is 1200x900

 

[Bill]

Hi guys many thanks for all your response it didn’t say with the instructions to prime the membrane on top but we primed underneath what would we prime on top with going to lift all the tiles it’s got a wet room former underneath the membrane

A tiling primer - if you are happy with the Mapei adhesive then use the mapei primer. you can buy it 1kg bottles and that is all you will need.

PRIMER G - https://www.mapei.com/gb/en/products-and-solutions/products/detail/primer-g

 

[Time's Ran Out]

Although primer G is an excellent product , I see no need to add another layer of any primer to a waterproof membrane. Just make sure it’s clean an dust free. IMHO the tile adhesive is meant to fix direct to the membrane.
What type of adhesive did you use 1st time round?

 

[Krystie]

Mapei flexible for wetroom and swimming pools

 

[Krystie]

This is the product

 

[Dumbo]

This is the product

View attachment 105862

Did you buy that from b and q

 

[Bill]

can you take photos of the shower area, please?