Search the forum,

Discuss Re using Victorian mosaic tiles in the Tile Cleaning and Restoration Forum area at TilersForums.com.

Hi,
I have acquired Victorian mosaic floor tiles that I am wanting to reuse to tile my exterior front door area!
How do I remove cement from the edges and do the tiles have to have all of the cement removed to be re laid effectively
 

Attachments

  • 81F170A3-735E-44DA-A0C0-7FFE7C21D2FA.jpeg
    934.6 KB · Views: 20

Lou

Admin
Staff member
Esteemed
866
1,473
Staffordshire

Reply to Re using Victorian mosaic tiles in the Tile Cleaning and Restoration Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Hello I plan to tile our bathroom with 60x60 cm tiles (8 mm thick) and the shower (because of the slope from all sides) will be done with mosaic tiles (5x5 cm). After researching I came to the...
Replies
7
Views
558
Good morning all. After a little advice. I'll post pictures a bit later. However.... The homeowner of the property I'm working on has just come to me and asked if anything can be done about...
Replies
6
Views
1K
  • Question
I've got an AKW Tuff form shower tray with a waste that is 10mm above the tray when fully screwed in. The Tiler laid my 5mm hex mosaic tiles on a 2mm bed, so obvs wasn't going to drain. I took...
Replies
6
Views
2K
    • Like
  • Question
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for tiling.I have removed the floor boards and plan to lay 18mm WBP plywood.The question is, what...
Replies
1
Views
620
    • Like
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0 There was some heated argument in the above thread! I don't have much...
Replies
1
Views
270
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Birthdays

Top